Blake's cb350 Cafe (Update: APRIL 10th Jetted,exhaust, all hard work done! PICS)
- Thread starter blake57
- Start date
ariel.714 o/c
Monkey see monkey do is all i see now days!
Re: CB350 by Blake (NEW PICS!!!!!)
really i didnt know! i thought back preashure was bad?B L A K E said:
Maritime
Over 10,000 Posts
Re: CB350 by Blake (NEW PICS!!!!!)
Led's for tail/brake lights are super easy, just plug and play. blinkers cause grief because of loads and old school flashers, but an LED stop tail will wire right up in the factory harness. I got one for 20, glassed it into my tail and now have a bright ass light that draws way less from my system. 2 Small trailer led tail/stop lights (dual intensity) could go right in the seat design you have and wire in with 0 trouble. It is a cool tail, LED lights would be easy and look great.
Led's for tail/brake lights are super easy, just plug and play. blinkers cause grief because of loads and old school flashers, but an LED stop tail will wire right up in the factory harness. I got one for 20, glassed it into my tail and now have a bright ass light that draws way less from my system. 2 Small trailer led tail/stop lights (dual intensity) could go right in the seat design you have and wire in with 0 trouble. It is a cool tail, LED lights would be easy and look great.
imseamless
Been Around the Block
Re: CB350 by Blake (NEW PICS!!!!!)
-Ben
Can you point me to a site to get these dual element, small round brake lights? I have looked everywhere and it seems all the small ones are just runner lights and I've read mixed reviews about hacking them (whether adding resisters in line, etc).JRK5892 said:
-Ben
blake57
"Against All Odds".
Re: CB350 by Blake (NEW PICS!!!!!)
i want something like this to flush mount to the top but smaller... http://www.jpcycles.com/product/ZZ34117
anyone got any ideas?
i want something like this to flush mount to the top but smaller... http://www.jpcycles.com/product/ZZ34117
anyone got any ideas?
VonYinzer
Over 10,000 Posts
Re: CB350 by Blake (NEW PICS!!!!!)
Do you mean would it phisically fit into the cowl, or would it look right? If your question is about the look, all that matters is that you dig it. Build your bike for you. Its the only way you'll be happy with the finished project.
B L A K E said:
Do you mean would it phisically fit into the cowl, or would it look right? If your question is about the look, all that matters is that you dig it. Build your bike for you. Its the only way you'll be happy with the finished project.
lockard666
Keep 'er 'tween tha ditches!
Re: CB350 by Blake (NEW PICS!!!!!)
on the paint, i would consider making the black stripe get wider as it swoops up across the tail the same way it does when it swoops down the tank... and yes, that orange is awesome.
on the paint, i would consider making the black stripe get wider as it swoops up across the tail the same way it does when it swoops down the tank... and yes, that orange is awesome.
lockard666
Keep 'er 'tween tha ditches!
Re: CB350 by Blake (NEW PICS!!!!!)
small multi function led tail lights.
these might be a little too big
http://cgi.ebay.com/ebaymotors/2-Red-2-Round-9-LED-Mini-Stop-Turn-Brake-Tail-Lights-_W0QQcmdZViewItemQQhashZitem5d2d53419aQQitemZ400192389530QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
these might be a little too small
http://cgi.ebay.com/ebaymotors/2-Mini-1-Red-3-LED-Custom-Stop-Turn-Tail-Lights-_W0QQcmdZViewItemQQhashZitem20b6ece76fQQitemZ140507932527QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
look for three wire hook ups... read the fine print, some of these thing will have a built in sequenced blinking effect when you energize the second hot wire... if you want a flashing brake light, i guess that could work.
small multi function led tail lights.
these might be a little too big
http://cgi.ebay.com/ebaymotors/2-Red-2-Round-9-LED-Mini-Stop-Turn-Brake-Tail-Lights-_W0QQcmdZViewItemQQhashZitem5d2d53419aQQitemZ400192389530QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
these might be a little too small
http://cgi.ebay.com/ebaymotors/2-Mini-1-Red-3-LED-Custom-Stop-Turn-Tail-Lights-_W0QQcmdZViewItemQQhashZitem20b6ece76fQQitemZ140507932527QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
look for three wire hook ups... read the fine print, some of these thing will have a built in sequenced blinking effect when you energize the second hot wire... if you want a flashing brake light, i guess that could work.
blake57
"Against All Odds".
Re: CB350 by Blake (NEW PICS!!!!!)
eh the round lights are SOOO over used on cafes... i want to do something different..
the vtx 1800 light would be cool because its still honda...
i need dementions for it... and i want something that is kinda flat but still sticks out a LITTLE.
LOCKARD666 said:
eh the round lights are SOOO over used on cafes... i want to do something different..
the vtx 1800 light would be cool because its still honda...
i need dementions for it... and i want something that is kinda flat but still sticks out a LITTLE.
