Cafe seat hoops/loops FOR SALE!! $50 +free shipping to USA addresses

Hi,

can you maybe help me with the following? Want to have the rear more like a cb750 becouse i really like the way it looks and it has a small bump at the end. Hope you can help me out.

rear_loop.png
 
2en0, what is the frame rail width (outside to outside) on the GS550? The sizes I can make could work for you depending on the measurement you have.

Firsttimer, I see the style you are looking for but it would likely take some fabrication work to give it that broken backbone look like the 750 you have in the picture. You could possibly weld a flat loop at a slight angle to give you a similar style. Let me know if interested.

Mastershake, glad I could help. :)
 
cafegoose said:
2en0, what is the frame rail width (outside to outside) on the GS550? The sizes I can make could work for you depending on the measurement you have.
Click to expand...

I will check it tomorow! :)
 
The frame on my bike measures about 8 and a quarter inches outside to outside. I will message you when I have cash in hand.
 
Hey Cafegoose i'm interested in one of your upturn hoops for an XS750 it measures in at around 9inches outside to outside, 1inch tube.
I'm on the Gold Coast over in Australia. Can you ship here? What additional cost would be involved.
Cheers
 
Well, here are some pictures of my bike:
the tube
1 inch

8429772879_7a214a74ea_c.jpg


The rail width :
22,5cm / 8,86 inch

8434133729_37e7ae5de8_c.jpg

8435218982_d117f40763_c.jpg


Can you help me out? ;D
 
2en0, the larger loop would fit this project great. I use 1" O.D. steel tubing and the outside to outside loop measurements to match your rail are approx 8.75-9" (you said yours is 8.86"). All I would need now is to know if you want a flat loop or one with a kickup. Send me a PM with your PayPal email address and the answer to my question and we can get started. Thanks, and good luck with your build. :)
 
Will this work good with the dime city brat seat?

http://www.dimecitycycles.com/vintage-brat-style-chassis-seat-parts-ribbed-black-leather-wrapped-dcc-originals-flat-brat-style-seat-dcc-brat-f.html
 
xwolf, re-sent the PM, I guess it didn't go through, sorry.

semaj, I'm not sure, possibly with some fabrication but I don't know of anyone that has tried this yet so I can't say for sure. Let me know, thanks.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom