RockVegas
New Member
Ok so I had the bike in the shed for a few weeks, wasnt getting any gas to the two carbs. (This bike has had tank sealant added to it by the previous owner.)
I pulled the bowls, dry. I pulled the fuel hoses on the petcock side, nothing coming through. I removed the fuel lever from the petcock and noticed the rubber coat button looking thing (fuel valve gasket?) behind it. The two holes on the left were partially clogged and I managed to clean them enough for the gas to start pissing out. The two on the right, however, looked to be blocked. Maybe even not blocked, not drilled out from the factory. Should all four of the button holes be clear?
I pulled the bowls, dry. I pulled the fuel hoses on the petcock side, nothing coming through. I removed the fuel lever from the petcock and noticed the rubber coat button looking thing (fuel valve gasket?) behind it. The two holes on the left were partially clogged and I managed to clean them enough for the gas to start pissing out. The two on the right, however, looked to be blocked. Maybe even not blocked, not drilled out from the factory. Should all four of the button holes be clear?