72texas350
Been Around the Block
Anyone?
Sorry forgot to post about this. I figured it out after I posted my last message. I took off the kickstart arm, connected a one end of a ratchet strap to the holes where the kickstart arm goes in, and the other end to the hitch of my car, just because I happened to be sitting next to it, and pulled the rest of the kickstart linkage off. Worked like charm!Eight40 said:Take the bolt out.....
Pry it off with a couple of larger screw drivers, taking care not to damage the seal in the cover....... If it's split, like the shifter linkage, spread it slightly with a flat screw driver, then pry it off...
72texas350 said:Sorry forgot to post about this. I figured it out after I posted my last message. I took off the kickstart arm, connected a one end of a ratchet strap to the holes where the kickstart arm goes in, and the other end to the hitch of my car, just because I happened to be sitting next to it, and pulled the rest of the kickstart linkage off. Worked like charm!
Bert Jan said:huh? connected a strap to the hole(s) the kickstarter goes in? WTF?
72texas350 said:So I took the right cover off re adjusted the shifter linkage and it all was working. I put it all back together and now it is stuck in neutral. It won't let me move the shifter up again just like before. And not it will let me move down, like to go to first, but won't actually do anything. What the hell could be going on?