CB360 Project: Lucky 7even! (still adding) SS brake lines June 17/11

Re: CB360 mock up! Now the real work starts.

Cool look on the filter. I'm curious to see how it works out for you. One thing, Bob that front fender! It'll look like a fighter plane!!
 
Re: CB360 mock up! Now the real work starts.

the filter looks awesome, I just hope your left side carb will get equal air..
 
Re: CB360 mock up! Now the real work starts.

Thanks for the compliments guys,also worried about the equal air flow, I'll keep you posted on how it performs. ;D
 
Re: CB360 mock up! Now the real work starts.

Curbcast do you have a photo?
Thanks



diesel450 said:
Cool look on the filter. I'm curious to see how it works out for you. One thing, Bob that front fender! It'll look like a fighter plane!!
Click to expand...

Thanks for the bob fender idea, I'll have to pickup an extra fender and give it a try. Fighter plane! I like that. ;D
 
Re: CB360 mock up! Now the real work starts.

It was on the cover of this months classic motorcycle mag or something. Check a mag shop. I looked online, but couldnt find it.
 
Re: CB360 mock up! Now the real work starts.

Thanks for the tips crazypj, your right the seat is a little close to the tank, might have to do some adjustment.

My360tsmall.jpg


As for the bars, for sure can take an inch off.
Thanks
 
Re: CB360 mock up! Now the real work starts. (Curbcast speedo pics are up)

Curbcast, here a few photo of what I came up with, all part are in ruff, and still needs to be finshed.
Hope this help you out. (Low quality pics, cellphone sorry).

Plate
speedomount1.jpg


speedomount2.jpg


speedomount3.jpg


Hardware
speedomount4.jpg


Mounted
speedomount5.jpg


speedomount6.jpg


speedomount7.jpg
 
Re: CB360 mock up! Now the real work starts. (Curbcast speedo pics are up)

Right on thanks. That looks really good! I tried to get to the metal shop before they closed yesterday, but no luck. My triple three doesnt have those mounting tabs...I didnt know yours was different. I think, since Im running clip ons, Im going to mount through one of my handlebar clamp holes.

What do you use to cut aluminum pieces so small? I always burn myself
 
Re: CB360 mock up! Now the real work starts. (Curbcast speedo pics are up)

Thanks, I use a dremel or hacksaw, the metal is soft,
your right is does get hot fast. Keep me updated on what
you come up with.
Thanks
 
Re: CB360 mock up! Now the real work starts. (Curbcast speedo pics are up)

cafePete said:
Thanks, I use a dremel or hacksaw, the metal is soft,
your right is does get hot fast. Keep me updated on what
you come up with.
Thanks
Click to expand...

use some wd-40 when cutting, I cut all my aluminum on a scroll saw or with a jig saw, and as long as you keep the cut line wet with the oil, it cuts like butter and doesn't get hot :)
 
Re: CB360 mock up! Now the real work starts. (Curbcast speedo pics are up)

Hey while were here. I see you dropped your front end? Is it just as easy as slipping the three down like you have on the fork tubes? In the photo you have your fork tubes butted up to your clubs.
 
Re: CB360 mock up! Now the real work starts. (Curbcast speedo pics are up)

Code:
rockcitycafe said:
use some wd-40 when cutting, I cut all my aluminum on a scroll saw or with a jig saw, and as long as you keep the cut line wet with the oil, it cuts like butter and doesn't get hot :)
Click to expand...
Thanks for the tip, I'll have to find my jigsaw, is their a blade
that works better? Also your build is look great.

Curbcast,
all I did was place a car jack under the motor, jack it up until
it just rests on the motor, lossen the trees and slowly
lower the jack until you get it were you want.
Thanks
 
Re: CB360 mock up! Now the real work starts.(filter added)

cafePete said:
Small update, found a $20 K&N filter on ebay, came up with this.

filterside4.jpg


filterside2.jpg


filterside3.jpg


filterside1.jpg
Click to expand...

I've been trying to figure out how to do something like that. My bike has 4 carbs and one of those sticking out each side would be awesome. What is the piping and where did you get it?
 
Re: CB360 mock up! Now the real work starts. (Curbcast speedo pics are up)

I picked up the piping at home depot in the plumbing department, they are rubber, I think their called quick fix.
 
Re: CB360 mock up! Now the real work starts. (Still mocking up!)

Holy Shit.

That filter setup is the coolest mod I've ever seen to a 360. I am going to try and copy...To be completely blunt.

Thanks again for the seat! Still chugging away at the bike!
 
Re: CB360 mock up! Now the real work starts. (Still mocking up!)

Ninetyeight said:
Holy Shit.

That filter setup is the coolest mod I've ever seen to a 360. I am going to try and copy...To be completely blunt.

Thanks again for the seat! Still chugging away at the bike!
Click to expand...

WOW thanks!
How's the bike coming, any new pics?
 
Re: CB360 mock up! Now the real work starts. (Still mocking up!)

Wow! I'm also going to steal borrow the intake idea! That's the tits! I've also got four carbs and that look will be killer!
Excellent work thus far dude! I've got such a hard-on for those scrambler pipes! They just look great. Keep it up mate.
Alex
 
Re: CB360 mock up! Now the real work starts. (Still mocking up!)

Deviant1 said:
Wow! I'm also going to steal borrow the intake idea! That's the tits! I've also got four carbs and that look will be killer!
Excellent work thus far dude! I've got such a hard-on for those scrambler pipes! They just look great. Keep it up mate.
Alex
Click to expand...
Thanks Alex! Glad that the filter mod was a hit. Very happy
with the bike so far, I'll keep the updates coming.
 
Re: CB360 mock up! Now the real work starts. (Still mocking up!)

Hi cafePete

I like to say ur 360 is lookin pretty good. How do you like your clubmans? I bought a pair of dragbars for my bike and I am going to try some clubmans and compare the two and see which one fits my style.

I also am liking your exhaust pipes than what I have on my bike. Mine are side by side.

Did you make your seat or buy it?

Thanks

Dave
 
Re: CB360 mock up! Now the real work starts. (Still mocking up!)

cafe350 said:
Hi cafePete

I like to say ur 360 is lookin pretty good. How do you like your clubmans? I bought a pair of dragbars for my bike and I am going to try some clubmans and compare the two and see which one fits my style.

I also am liking your exhaust pipes than what I have on my bike. Mine are side by side.

Did you make your seat or buy it?

Thanks

Dave
Click to expand...
Thanks Dave,
I really do like the clubmans, I had a 2001 R6 for 6 years before the 360, so the clubmans are a nice change.
I also had the side by side at first, picked up a set of 350 pipes,cut them to fit and used the side by side mufflers, very happy with it.
I made the seat, alot easier the I first thought, $10 of foam,$20 of fiberglass and resin and alot of bondo. ;D
Also love the colour of your bike, did you paint it?
Peter
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom