CB450 71 Cafe AkA DraGon

IndieSol said:
Mine have an arrow indicating direction of fuel flow.

The bike is looking great. I just caught the thread, but will be watching from here on out.

Yeah, look for the flow direction arrows. You want any debris from the incoming fuel to settle in the chamber around the outside of the filter element not inside the element itself.

Beautiful bike BTW.

CC
 
borzwazie said:
when you're done, it'll be like the upscale cousin of my bike! ;D

that tank is cool, isn't it?

You gave me the idea for the tank :) SOOOO COOL! As well for the tank mount!
 
revheadgl said:
We sold that type fuel filter for many many years and have fitted them to a wide range of bikes with no problems at all. Those filters are very free flowing, they are not a fine filter and are way less restrictive than the paper type filters. I have run just a single on a CB900 with no problems at all.

:) cool thank so 1 should be fine?

Did I put it reverse?

Thanks.
 
Hi everyone :) yesterday I was able to put the motor back into the frame :D YOUHOUUUU!!!

Installed my battery box under the seat, polished a little bit of the paint and clear.

Here's what it looks like now.
DSCN7771.JPG

DSCN7769.JPG

DSCN7772.JPG

DSCN7773.JPG


Thats is for today folks!

See ya around!
 
I know I haven't post on my tread for a while... a lot of thing happend to me... lost my job, found another one, moving in 3 week so, just for you guys that are following my tread, I was able to start the best last friday... it took its first breath! O..M..G!!! I could take a video and at the in I had a short in my electrical system because of some changes I've made on the harness. Next time I promess.

BTW I ordered some SICK pipe... from MCM made to go as a scrambler but to go down after...

Here's a pic! Can't wait to have them on hand and to install them to hear it scream in my hear... SCREAMMMM LIKE AN EAGLE!!! :)


Sans%20titre.jpg



Sans%20titre2.jpg

Sans%20titre3.jpg

Sans%20titre4.jpg
 
joevirus563 said:
BTW I ordered some SICK pipe... from MCM made to go as a scrambler but to go down after...

Here's a pic! Can't wait to have them on hand and to install them to hear it scream in my hear... SCREAMMMM LIKE AN EAGLE!!! :)


Sans%20titre.jpg

Can't wait to see what these pipes look like on a bike. I have been debating if I should get me a set for my 1970 cb450 but was not sure how they would look. Nice build by the way!
 
felkman said:
Can't wait to see what these pipes look like on a bike. I have been debating if I should get me a set for my 1970 cb450 but was not sure how they would look. Nice build by the way!

Hey if you still want a set I can sell you mine... can't make them fit with muffler, I have full lenght slipon so can't make them fit correctly.

Let me know.
 
Wow, that is some amazing work you're doing there. This has given me inspiration for my 450. I hope you don't mind me stealing some ideas from you. Great work, can't wait to see how you finish this up.

Mike
 
Ludacity said:
Wow, that is some amazing work you're doing there. This has given me inspiration for my 450. I hope you don't mind me stealing some ideas from you. Great work, can't wait to see how you finish this up.

Mike

Thanks :) No take ideas if you want. Feel free to ask question about how I made it happen that way and I'll speak my mind :) I had to solder a part of tubing inside the stock headers and the riser because they where the same size.
 
joevirus563 said:
Hi guys here's a quick pic of my project :D Muffler installed with riser ;).


See ya.

Are those the stock mufflers? How did you make them "upswept"??


C360_2011-01-23%2019-22-35.jpg
 
Re: Re: CB450 71 Cafe AkA DraGon

No. Not stock riser I bought them on dcc. Let me know I could send you a linky

Sent from my Nexus One
 
Back
Top Bottom