Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Welded up ignition barrel and did some work on the tank. Cut the bung and the petcock nozzle and welded onto my new tank. Ran out of gas so still need to finish off the petcock.
Started on the exhaust. Making my own silencer so did some cuts on that. Will weld up sometime this week.
Started to bog and sand the frame, nothing much to show. A mate is starting to sandblast most of the parts. Starting to prep and mask things off ready for painting. Hopefully get a rolling chassis again in the next few weeks
Didn't end up using the alloy seat pan because it got too difficult to poke a hole in the leather at the right spot to line up with the rivet holes. I'm sure there's an easier way that I don't know about.
Seat pan out of wood instead and easily stretched leather over the top and tack with a hammer
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.