JFarhanbod
New Member
First bike,first time working on them. I somehow decided that a front end swap would be a good idea lol. Anyways I have a 84 Gpz550 and I'm putting an 07 GSXR1000 front end on.
The Gpz550 bearing sizes are
Upper: 25x47x15
Lower: 28x52x16
The GSXR1000 are
Upper: 30x47x12
Lower: 30x52x16
Soo since the outer diameter of the 2 are the same, my plan is to use the stock gsxr bearings, triple trees and all that. Is there anything that I'm missing? Other than the stem length but according to a quick measurement (with the gpz550 front end still on the bike) they look to be almost the same length. I need the upper triple tree for the gsxr so before I spend more money, do I have the right idea with this?
The Gpz550 bearing sizes are
Upper: 25x47x15
Lower: 28x52x16
The GSXR1000 are
Upper: 30x47x12
Lower: 30x52x16
Soo since the outer diameter of the 2 are the same, my plan is to use the stock gsxr bearings, triple trees and all that. Is there anything that I'm missing? Other than the stem length but according to a quick measurement (with the gpz550 front end still on the bike) they look to be almost the same length. I need the upper triple tree for the gsxr so before I spend more money, do I have the right idea with this?