having trouble rotating the ac gen. rotor

[72cb350]

im having trouble rotating the disc that i have to rotate to line up the "LT" with the stator index mark. do i romove the screws or.......???

 

[SONICJK]

More info.

Remove the alternator cover, then there's a 14mm bolt in the center of the stator. Turn this counter clockwise with a 14 mm wrench. If it doesn't turn you have much bigger issues.

 

[72cb350]

the motor is siezed i know that.

 

[Sonreir]

the motor is siezed i know that.

:

Well there's your answer.

 

[72cb350]

obviously. but how should i rotate it?

 

[SONICJK]

Like I said bigger issues.
You have a lot of reading to do.

But basically there's a few ways to unstick the engine all of which can be found on this forum using the search

 

[Moa]

Check out this website: http://www.dansmc.com/mc_repaircourse.htm, it has lots of great info on DIY motorcycle repairs and maintenance. Here's the section on unsticking a seized engine: http://www.dansmc.com/stuck_engine.htm

 

[GLENNWOOD55CAMEO]

Remove the plugs and spray in a penetrating oil called "Kroil". It works great>>>> http://www.kanolabs.com/ Once the Kroil has had time to soak, you can put the bike in first gear and rock it back and forthto try to free up the motor.......