Just Another CB360 Build

Braced the frame to narrow it for tail section fitment so we didn't have to cut it shorter than the shock mounts.
 

Attachments

  • uploadfromtaptalk1354903816771.jpg
    uploadfromtaptalk1354903816771.jpg
    59.3 KB · Views: 250
  • uploadfromtaptalk1354903835217.jpg
    uploadfromtaptalk1354903835217.jpg
    51.3 KB · Views: 226
Cut down the stock rear hoop and welded it into its new location. Then started mocking up the battery tray and electronics tray. Starting sheet metal work next week.
 

Attachments

  • uploadfromtaptalk1354904085534.jpg
    uploadfromtaptalk1354904085534.jpg
    46.8 KB · Views: 236
  • uploadfromtaptalk1354904097403.jpg
    uploadfromtaptalk1354904097403.jpg
    41.8 KB · Views: 503
Even got the tail section in its final mounting point. May take some tweaks once the rest is done.
 

Attachments

  • uploadfromtaptalk1354904300977.jpg
    uploadfromtaptalk1354904300977.jpg
    49.9 KB · Views: 245
Shred_McGnar said:
Braced the frame to narrow it for tail section fitment so we didn't have to cut it shorter than the shock mounts.
Click to expand...

What was all this bracing for? It's got me puzzled. Keep it up, really enjoying reading the updates, and that tank is looking killer!!!
 
To make sure one side didn't flex more than the other when we pinched the frame and to make sure it bent where we wanted it to
 
Didn't work on the bike last week.. Moved across town.. What a nightmare.. Anyhow, got a electronics tray fabbed up and tacked in place.. still have some cleaning up to do and waiting for my battery to arrive before I can mount electronics and start wiring.
 

Attachments

  • uploadfromtaptalk1355863764800.jpg
    uploadfromtaptalk1355863764800.jpg
    92.3 KB · Views: 672
  • uploadfromtaptalk1355863775908.jpg
    uploadfromtaptalk1355863775908.jpg
    78.3 KB · Views: 238
  • uploadfromtaptalk1355863786578.jpg
    uploadfromtaptalk1355863786578.jpg
    92.4 KB · Views: 228
Nice work, I'm trying to figure out how I can do something similar to my bike. Did you just weld the tray onto the sides of the frame? And battery goes in the back?
 
Hey all! Sorry for the delay in progress.. the tattoo shop I work at moved and we did all of the upfitting so free-time has been lacking. We have finally gotten in and open for business. So, I am hoping to be able to work on the 360 asap!
 
Re: Re: Just Another CB360 Build

edukaycheon said:
Nice work, I'm trying to figure out how I can do something similar to my bike. Did you just weld the tray onto the sides of the frame? And battery goes in the back?
Click to expand...
yes welded to the inside of the frame rails and made room under the seat pan for the battery to run
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom