andreas_boman@hotmail.com
Been Around the Block
Hi guys, would need some help with my KZ.
Just about to start with a new seat and what I've heard is that the best way is to buy some sheet metal and cut it like the frame. The problem with my bike is that it's not flat and therefore there might be a problem shaping the metal. I'll attach some pics how my frame looks like, and what I want it to look like.
Measurements are; starting from the front: 18cm by the tank, 24cm at the widest point, and 23cm when the rear starts to bend.
What would be the best way of continuing? Lowering the fender or not.. Shaping the metal and how..etc.
Just about to start with a new seat and what I've heard is that the best way is to buy some sheet metal and cut it like the frame. The problem with my bike is that it's not flat and therefore there might be a problem shaping the metal. I'll attach some pics how my frame looks like, and what I want it to look like.
Measurements are; starting from the front: 18cm by the tank, 24cm at the widest point, and 23cm when the rear starts to bend.
What would be the best way of continuing? Lowering the fender or not.. Shaping the metal and how..etc.