Liam's ACE 125
- Thread starter ACE125toy
- Start date
ACE125toy
Been Around the Block
Hazza00 said:
I'm not finished with the back end yet i have some plate i'm going to use to protect the bottom of the seat and the electrical bits, after i get them done i will take a step back and see what i think.
at the moment i kind of like the gap, but i will see how it goes as an everyday ride.
ACE125toy
Been Around the Block
Some good news from the man room this morning, my new headlamp has arrived.
things that are going to happen this Friday and Saturday.
1. move ignition switch to keep the front tidy.
2. re-mount the speedo again to tidy front end.
3. fit head lamp mounts and lamp.
4. Sort the clip ons, as not happy with them moving when tightened down. May have to get some different ones as not keen on the machined ally look.
5. Fit kill switch
6. Adjust mirrors so i might be able to see something behind me.
7. make a shim for the exhaust so it actually seals.
8. chop front fender and paint.
9. make up the ally plates for the rear fender protection.
and finally No. 10, go for a bloody ride on the thing!!!!
word of advice for those new ACE owners out there dont start modding or you will never stop.
things that are going to happen this Friday and Saturday.
1. move ignition switch to keep the front tidy.
2. re-mount the speedo again to tidy front end.
3. fit head lamp mounts and lamp.
4. Sort the clip ons, as not happy with them moving when tightened down. May have to get some different ones as not keen on the machined ally look.
5. Fit kill switch
6. Adjust mirrors so i might be able to see something behind me.
7. make a shim for the exhaust so it actually seals.
8. chop front fender and paint.
9. make up the ally plates for the rear fender protection.
and finally No. 10, go for a bloody ride on the thing!!!!
word of advice for those new ACE owners out there dont start modding or you will never stop.
sprocket2cog
Been Around the Block
looking good,where did you get the clip ons ?
stroker crazy
crazy as a fox
ACE125toy said:
What were you thinking of replacing them with?
Crazy
stroker crazy
crazy as a fox
ACE125toy said:
I used Tarozzi's, they are very tidy!
Crazy
stroker crazy
crazy as a fox
I got mine from PPMP.
They appear to have some very nasty website issues at the moment, but here are some links:
http://www.motorcycle-parts.com.au/ and http://www.motorcycle-parts.com.au/Tarozzi.htm
Maybe a phone call would be best! There's a good chance someone in your corner also sells them.
They certainly look neat installed:
Crazy
They appear to have some very nasty website issues at the moment, but here are some links:
http://www.motorcycle-parts.com.au/ and http://www.motorcycle-parts.com.au/Tarozzi.htm
Maybe a phone call would be best! There's a good chance someone in your corner also sells them.
They certainly look neat installed:
Crazy
ACE125toy
Been Around the Block
They are pretty nice.
Just been out for a ride finally only did 50k's but that was enough in this heat.
Learned a couple of things, what the bike sounds like when it's running out of fuel, the performance of the bike is dramatically reduce when it runs out of fuel and my bar end mirrors are really hard to get in the right place!
And some pics seen as the sun is out.
Sorry for the crap quality pic but the wife took the card out the camera and took it away with her for three weeks.
Just been out for a ride finally only did 50k's but that was enough in this heat.
Learned a couple of things, what the bike sounds like when it's running out of fuel, the performance of the bike is dramatically reduce when it runs out of fuel and my bar end mirrors are really hard to get in the right place!
And some pics seen as the sun is out.
Sorry for the crap quality pic but the wife took the card out the camera and took it away with her for three weeks.
