Tune-A-Fish
BOTM LOSER Proudly Deplorable
Are we talkin cyly base or rings in the head for the header?
I mean it's .5mm gasket I looking at getting a .79mm (1/32) gasket.hillsy said:It will probably mess with your cam timing as it will lift the head up a tad and the cam chain links will not correspond. You might get lucky and it's exactly one link out....or else you'll need to slot the cam sprocket and time it manually.
Mostly because I have access to 1/32" gasket material for free...hillsy said:Anyway, why the double gasket?
Tune-A-Fish said:Are we talkin cyly base or rings in the head for the header?
crazypj said:Biggest issue with MAC exhausts is the baffles are so restrictive you loose power. They do a 'straight through' for 'race' applications but apparently it isn't too bad. There isn't a reason to shorten pipe, all it will do is reduce ground clearance on right side. Maybe you just want to make sparks when cornering? ;D