1
1971G3SS
Guest
I have the mini LED speedo from dime city cycles and I'm trying to install into to the stock wiring harness for the 1981 yamaha sr250 I have. I'm extremely frustrated because I thought it would be a fairly simple install. I have followed all the wiring diagrams "I think" and I'm not getting anything. Here's where I'm at:
Connected all the ground wires from the dcc mini speedo to the black ground wire to the harness.
Connected each indicator wire to the corresponding wire from the harness.
The only indicator working is the neutral light.
From what I've noticed is that the sky blue wire for some reason will power whatever it touches and if it touches the ground wire it will power the starting motor.
What's going on and can anyone point me in the right direction to get this speedometer to work like it should?
Connected all the ground wires from the dcc mini speedo to the black ground wire to the harness.
Connected each indicator wire to the corresponding wire from the harness.
The only indicator working is the neutral light.
From what I've noticed is that the sky blue wire for some reason will power whatever it touches and if it touches the ground wire it will power the starting motor.
What's going on and can anyone point me in the right direction to get this speedometer to work like it should?