schvizen said:Looks good. How does the kick starter clear the rear brake rearset? Also, where did you get your throttle cable that connects the stock throttle to the mikuni carbs? Thanks.
HerrDeacon said:Very nice bike! Pretty wild story how the bike got to you. Was it damaged much from the tornado?
noyko said:how did you get your engine looking so nice.
polish?
schvizen said:Sorry to dwell on this, but is it the stock 350 kickstarter, or did you replace it with another bike's kickstarter?
woody1981 said:Okay... this is getting ridicules... are you going to give us all the details on the motor clean up or what? CAUSE IT LOOKS FREAKIN' AWESOME!!!!
Also, what are those carbs from? Did they make a big difference? Did it take a lot of tuning?
Thanks,
- Woody
killjchu said:the engine clean up was using alot of 3M rolac sanding/polishing wheels on the cylinders and head, they thin enough to get between the fins nicely and the lower end and side covers is just a ceramic based paint that cures with heat. you can pick the paint up at most auto stores and auto paint supply stores. the carbs are Mikuni 34mm sliders, real easy to tune and sync. you can get them from Todd Henning Racing or 32mm from Sporting For Less (they get them from Sudco)
woody1981 said:Thanks!!!