Need help Kreeming my tank

[THE_SHRUB]

K so as the title says, I need a bit of help. Basically i simply cannot decide how to plug the petcock hole, and the filler hole on the tank. Any suggestions on how to do this would be awesome

Thanks

 

[Tristan]

Ive heard bad things about Kreem. Supposedly, If you miss even a pinhead sized area and rust starts to form at that point, it will cause the Kreem around it to flake... which makes a mess in your gas tank

 

[ericngsta]

I prefer por 15 over kreem. But I just used duct tape to tape of the petcock threads, you will have to remove it to empty out the remaining sealant.

 

[gribbs]

If you just cover it from the outside, doesnt the cream get down onto the threads and that would mess them up?? My friend did mine, I think he used a piece of heat shrink, and put two screws through it and into the pet mount holes, and that created an outside seal. I think that is what he did, but I didnt too pay attention really.

 

[THE_SHRUB]

I prefer por 15 over kreem. But I just used duct tape to tape of the petcock threads, you will have to remove it to empty out the remaining sealant.

its kinda too late to decide which one i want to use. i mean i already bought the stuff and I just finished kreeming the tank yesterday, It looks like it turned out alright so far...