Cody.linhart
Been Around the Block
redwillissuperman said:Who lives in Knoxville? Just bought a bike.
Knoxville!
redwillissuperman said:Who lives in Knoxville? Just bought a bike.
Ah, you're the one who out bid me.JustinLonghorn said:
deviant said:What did those end up going for? Sounds like everyone was in on the bidding. I hope no more that $100 for the pair.
A little conventional machining instead of climb milling?J-Rod10 said:Finally had a hour to get my cnc retrofit hooked up on my Bridgeport, and running. Been sitting here since April. NMTB30 tapered chuck and a collet set are in route. Pretty much just going to use this one to do rear sets on.
https://youtu.be/uCrWEG3AF7k
Just punched in a few lines there to watch the table move. I'll draw them in the fancy software and optimize them before I run anything. Spin that thing up about 3K and let her fly.hurco550 said:A little conventional machining instead of climb milling?
That's awesome. I spend my fair share of time behind a prototrak 2 axis. You can do an amazing amount of things with themJ-Rod10 said:Just punched in a few lines there to watch the table move. I'll draw them in the fancy software and optimize them before I run anything. Spin that thing up about 3K and let her fly.
No doubt. I still need to attach the Z and the 4th axis. But for now, running X Y to profile will work.hurco550 said:That's awesome. I spend my fair share of time behind a prototrak 2 axis. You can do an amazing amount of things with them
hurco550 said:That's awesome. I spend my fair share of time behind a prototrak 2 axis. You can do an amazing amount of things with them
Personally for the work I did, I preferred the z axis dro only with x,y cnc. Without a tool changer, there isn't a ton to be gained with a z drive. Not like you can hit go and complete a part anyways without a tool changerJ-Rod10 said:No doubt. I still need to attach the Z and the 4th axis. But for now, running X Y to profile will work.
That's a bad deal. They are some of the best conversational systems I've been around (second to hurco) lolMr.E said:both my work proto traks are dead work won't budget it to replace them either
Well, some I can. Rearsets, I can stick in a vice, run a 3/16" endmill, plunge the bolt circle, circle mill the rest of the holes. Slap them on a fixture, and profile them.hurco550 said:Personally for the work I did, I preferred the z axis dro only with x,y cnc. Without a tool changer, there isn't a ton to be gained with a z drive. Not like you can hit go and complete a part anyways without a tool changer
That's a bummer.Mr.E said:both my work proto traks are dead work won't budget it to replace them either
Yeah true, if you can do it all with one tool, a z drive would be niceJ-Rod10 said:Well, some I can. Rearsets, I can stick in a vice, run a 3/16" endmill, plunge the bolt circle, circle mill the rest of the holes. Slap them on a fixture, and profile them.
Sent from my SAMSUNG-SM-N920A using Tapatalk
hurco550 said:Personally for the work I did, I preferred the z axis dro only with x,y cnc. Without a tool changer, there isn't a ton to be gained with a z drive. Not like you can hit go and complete a part anyways without a tool changer
Sav0r said:I do lots of 3d parts, so z-axis is necessary. But a lack of auto tool changer is a scenario you learn to work around. You figure out how to get the longest runs out of an individual tool, and you have to be willing to sacrifice a little extra material or add some run time to avoid a tool change. Is it perfect? Nope. But building/buying a tool changer can be quite a project. And the time investment involved in accurately generating a tool library can be fairly overwhelming if you don't actually get to do it for a living. Setting up runs with fewer tools also means less chance of really fucking up. My latest project was to install a web cam on my machine. I go drink beer on my porch with the web feed up on my iPad and when the operation stops for a tool change I wonder back to my shop and perform the change. An auto tool changer would be amazing, but so is drinking beer while work gets done.
The profile was built by the guys that built the control specifically for that control. Just downloading Mach, and telling it to go doesn't work.Sav0r said:I do lots of 3d parts, so z-axis is necessary. But a lack of auto tool changer is a scenario you learn to work around. You figure out how to get the longest runs out of an individual tool, and you have to be willing to sacrifice a little extra material or add some run time to avoid a tool change. Is it perfect? Nope. But building/buying a tool changer can be quite a project. And the time investment involved in accurately generating a tool library can be fairly overwhelming if you don't actually get to do it for a living. Setting up runs with fewer tools also means less chance of really fucking up. My latest project was to install a web cam on my machine. I go drink beer on my porch with the web feed up on my iPad and when the operation stops for a tool change I wonder back to my shop and perform the change. An auto tool changer would be amazing, but so is drinking beer while work gets done.
J-Rod, what Mach screenset are you using?