Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
more or less like the last. got the rear tank mount made. nice and solid. changed out the rear shock spring to a stiffer one. was planning on powdercoating it red, but i actually like the black. (what are your opinions on color??) also started modifying the seat pan to fit low to the subframe. now just need to make seat mounts.
not much of an update. it's been back down to normal high of 40 degrees march temps. did install the chain and rear brake line. got a little more work done on the seat pan. hope to have it mounted this week.
weather has been all over the place, but managed to get a few more things done.
ground off the steering stem welds and pressed it out. then i machined the bottom off the top triple to drop it down.
while i had the triple apart, i also machined some material out of the bottom of the lower clamp to lighten it.
no pics of this, but i had to turn the steering stem down to 25mm at the bottom to accept a stand size bearing. then welded it back onto the lower triple clamp.
i trimmed the rear subframe and mounted the forks and triple back on. looks better imo. i also machined an aluminum spacer for the rear shock to give me more adjustment.
lastly, i cut the stock seat foam to the height i wanted. have gone through maybe 4 different ideas for a seat mount and just tonight settled on one. so i'll soon be making that.
been super crappy out, but managed to get a lot done in the past few days.
cleaned the tank with a sulfuric acid / vinegar mix
and finished up the front and rear seat mounts
adjusted the rearsets to a comfortable riding position and fabbed up some shifter linakge
and lastly, modified the pipe and added a team calamari twin silencer
a few things i didn't get pics of like the cdi and coil mounts i made under the tank, and i adjusted the shock reservoir hose angle for better mounting and had it filled with nitrogen. really close to the first ride (when temps support it) just need to mock up a radiator
no. at some point i'm going to make a low pipe for it and then i'll either run a different radiator up front, or one between the rear subframe with ducts to it
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.