Seat Hoops. .120 Wall- $35 shipped

[harper06]

Sent you payment today. Thanks.

 

[Scratcher09]

Today I worked on one of the hoops I got from you. Came out well. Thank you.

 

[HolyRoller]

Hey Sonic.

Looking for a hoop with 20 degree upswing...

Sorry the pic is in CMs!

Can you manage this width? I think the conversion from 22cm to inches is about 8 1/2 inches.

 

[CupidsDeathDay]

I could really use one of these for my GS450. I will need one with a slight up-sweep and i beleive my frame from OD to OD is already 8" but i will have to double check to make sure.

Are you including any frame slugs for these or do we have to get those ourselves?
I really didn't want to read through the whole thread to see if someone else already asked. I did a search but nothing came up.

 

[SONICJK]

Hey Sonic.

Looking for a hoop with 20 degree upswing...

Sorry the pic is in CMs!

Can you manage this width? I think the conversion from 22cm to inches is about 8 1/2 inches.

8.5 outside to outside will work just fine! Your seat will be 1/2 inch wider in the middle but that shouldn't be an issue. If it is I can weld a 1/2" spacer in the center but I wouldn't bother if I were you.

 

[SONICJK]

I could really use one of these for my GS450. I will need one with a slight up-sweep and i beleive my frame from OD to OD is already 8" but i will have to double check to make sure.

Are you including any frame slugs for these or do we have to get those ourselves?
I really didn't want to read through the whole thread to see if someone else already asked. I did a search but nothing came up.

Hey man,
No slugs here my lathe is still on the back burner unfortunately.
The hoop with a kick is no problem though

 

[firebane]

Wheres the pics of various angles??? You said you'd have it like two weeks ago..

 

[CupidsDeathDay]

Hey man,
No slugs here my lathe is still on the back burner unfortunately.
The hoop with a kick is no problem though

Thanks for the info. I will get back to you on that. I need to measure the exact upswept angle i need and to confirm the frame width. Thanks again! I will PM you with info.

 

[SONICJK]

Wheres the pics of various angles??? You said you'd have it like two weeks ago..

I know man, hopefully tomorrow. This is not my day job, I've barely had time to bend up orders lately much less bend extra and take pictures. I'll do my best to get them tomorrow. Work is a bitch.

 

[SaltCityCafe]

Hey sonic you want me to post a pic of mine with the 15 degree angle for him?

 

[firebane]

Hey sonic you want me to post a pic of mine with the 15 degree angle for him?

I think if people have his hoops they should post pictures.. it helps sell things better.

 

[SONICJK]

I'm about to ditch work for a while to bend some up so I'll post up in the next couple hours.
Don't tell my boss.
(self employed ;D )

 

[SONICJK]

Alright ya bunch of impatient Nancies ;D :
Here you are. 0, 15, and 20 degree hoops.
Yes, it was supposed to be 10, but I ran out of tube and fucked up and bent the last one at 15 degrees. So use your imagination.


Flat:


15 degrees:


20 degrees:

 

[firebane]

Much obliged sir.

I'll be taking some measurements in the next day or two.

 

[HolyRoller]

Good day to you Sonic!

PM sent.

HR

 

[CupidsDeathDay]

Hey. I want to know if you would be willing to do a custom bend on these?

Something like this?

 

[CupidsDeathDay]

If not, i will get back to you on what works better for me on the angles. I think the 20* might work but im not sure, i need to remeasure to make sure it would work. Measure twice, cut once!

 

[SONICJK]

Hey. I want to know if you would be willing to do a custom bend on these?

Something like this?

Yeah that's no problem.
I can't guarantee it will be precisely 23 degrees but I should be able to get it within a degree or two

 

[CupidsDeathDay]

Awesome! I will double check my measurements to confirm that it will work. I just like to be very sure im getting the right size. But once i re-measure, i will send you a PM with the info!

Thanks much!

 

[maschkt1]

Are you including any frame slugs for these or do we have to get those ourselves?
I really didn't want to read through the whole thread to see if someone else already asked. I did a search but nothing came up.

i apologize, this is probably a dumb questions. but what are slugs?