stroker crazy
crazy as a fox
giantclam said:Just a thought....
Thanks for the input!
These avenues will be explored and any success will posted here.
Crazy
giantclam said:Just a thought....
giantclam said:Just a thought....
Before you start putting bigger rotors on (naturally, a good idea) has anyone considered using a better caliper? As I am not a ace owner, I am not able to see the clearance between spokes and rotor, but I was thinking something like a pre radial GSXR tokico or perhaps CBR nissin 4 pot caliper, both very cheap and abundant on ebay. May need to upgrade the M/C also.
this is a popular upgrade to the SV650 which come with flimsy 2 piston calipers (which are probably better than the stock ace ones).
Also I had the thought...
the front rotor of the ace has quite a bit of offset, if you got a larger rotor with zero offset, an adapter could be made to correct the bolt pattern and be the thickness of the offset to give correct disc spacing? Once again choose something that's around 280mm and easy and cheap to get.
café (r)acer said:Are you going to the antwerp DGR?
nicopotvin said:Absolutely.. other fellow Aces in DGR Antwerp?
Absolutely that helps. Thank you!Racing Ruben said:Is this the one you need? It's a M4 screw. Total length 8mm, without head it's 5mm. I hope this helps.
ACEitup said:would this be do able on the ACE ???
orrible-64 said:twin turbo postie c90
hahahha watched fastest indian last nightstroker crazy said:Anything is doable,