Recent content by biker_reject

Survived the who now? I don’t get it. Sent from my iPhone using DO THE TON

‘85 zx600A front end. Stock wheel/hub. Sent from my iPhone using DO THE TON

I have never seen tanks as crappy as Zephyr tanks. There was nothing to salvage really. I’m not even sure the tunnel is good. Sent from my iPhone using DO THE TON

Sent from my iPhone using DO THE TON

Fairing stay/headlight bracket in its infancy Sent from my iPhone using DO THE TON

Sent from my iPhone using DO THE TON

Sent from my iPhone using DO THE TON

Don’t ask me why I started a new project! Sent from my iPhone using DO THE TON

The seat and removable cowl. Sent from my iPhone using DO THE TON

Last summer’s blunder! Rear sets in the way of kickstand and kickstart. So, back to the stockers. Glad I didn’t throw them away. I tack welded a gusset on one bracket because I thought it might look cool. It didn’t, so I smacked it off with a hammer. [emoji1]

I replaced the cracked o rings on the t fittings and now they won’t fit into the carb bodies. The ones I removed had a flat outer edge which I assumed got that way after 30 years. My question is, are there special o rings for these fittings??? Sent from my iPhone using DO THE TON

Also working on mounting tach. I found this bracket in my parts bin that will work. Welded the back cover of the tach to the bracket. I think the angle is good. Not sure how much of the “ears” to lop off. I plan to mount a mini speedo to the left of the tach. Sent from my iPhone using DO...

Cold weather caught up to me right as I was starting my seat. Hoping my slow cure hardener will work in my 60 degree basement. Sent from my iPhone using DO THE TON

Got my gixxer rear master today. Here it is mocked up with Cognito Moto bracket and Silbernagel rearset. Sent from my iPhone using DO THE TON

ZX600A (‘85) onto my ‘78 kz400 Sent from my iPhone using DO THE TON