Search results

Did you ever make progress on this? I am Looking to do the same thing as my carbs are looking real bad. Sent from my SM-G930V using Tapatalk

My wife has decided that she wants to cafe her cm450. Now I know a thing or two about custom builds but new to cafe bikes. I have looked in to seats but what I and trying to figure out is what to do about the battery. I want it as hidden as posible. Sent from my SM-G900V using Tapatalk

Found a end for the cable at harbor fright Sent from my SM-G900V using Tapatalk

I never use a stearing lock just drill the thing out lol and he realy should have a spare it's just common sense Sent from my SM-G900V using Tapatalk

Agreed ethinol is hydoscopic and when it sits it in a tank will cause all sorts of troble if any question drain the tank and fill with new gas, efree if you can get it. I have to eather ride 30 Mikes east or to the horsetooth marina hear for efree. Sent from my SM-G900V using Tapatalk

I would be using a external pump and puting the ignition under control of the microsquirt. The bike is kick only right now and all lights have been switched to led other than the headlight which is a h4 automotive bulb so that should bring the power consumption to a more reasonable load I would...

I would use he microsquirt controller and the idea behind he gsxr throttle bodys is to use the tps and map. Then I would use a gm o2 sensor and coil I'm not sure what I will use for a oil temp sensor Sent from my SM-G900V using Tapatalk

I'm interested in the spacing as well I am looking at going efi and I found several sets of gsxr throttle bodys for $50 a pice local and would like to use them as that is what I am using for my yamaha build Sent from my SM-G900V using Tapatalk

I have a interesting spin on this, what about a sohc 750 enging in a dohc 900 frame I want the kickstart with the subtransmition for a sidcar build I am already mocking up a subframe based on the forward control brackets made for the 750 engine Sent from my SM-G900V using Tapatalk

I'm not actually doing rear sets I am building forward controlls And I am using a cm250 front brake cable my hole is to use a cable that I can get t any honda dealership so if I need a replacment I can just go pick it up Sent from my SM-G900V using Tapatalk

I found a front brake cable from a cm250 with a front drum brake. But how did you make your mounts Sent from my SM-G900V using Tapatalk

Where did you get your cable I am going the other direction so I need a 4 foot long cable but I haven't been able to find one and nobody locally has the ends to make my own I am leaning towards a clutch cable from a cb750 as I have one laying around Sent from my ME302KL using Tapatalk

Re: 1986 Yamaha Venture Royale "Project: Freightliner" DONE WITH BONUS TRAILER Dot worry about geting any flack I have a cb750 that I love but when it comes to eating up miles on the highway he venture is where it is at I have a 89 with a sidecar that I use for long trips and I love...