Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Hi Everyone-
I'm finishing up a rebuild on my 74 CL360 and I'm having a problem getting the starter motor to turn over. The starter motor is brand new so I don't think the issue is with the actual motor. When I press the start button, the solenoid clicks but the starter motor won't...
Hi Everyone,
I'm in the process of doing a top end rebuild on my 1974 cl360. I was taking the valves out today and I noticed these wear marks on the cylinder head. It looks like the cam chain wasn't properly installed at one point and has worn down part of the cylinder head. The part...
Hi Everyone,
I have a 74 CL360 with mikuni vm28's and a pamco electronic ignition. Just had the bike in the shop for a couple of weeks (problems getting the pamco to work and had them install the vm28's for me) and when I got the bike back she was up and running again. The day after I got...
Sorry if this is violating the rules but I have a question based on my previous post in the engines forum that I think would be more appropriate for the electrical forum. Previous post is here: http://www.dotheton.com/forum/index.php?topic=75770.0
I'm trying to wire up a pamco electronic...
Hi Everyone,
I have a 1974 CB360 that I'm having problems getting started up. The bike previously ran fine, but about 6 months ago I decided to install a pamco ignition and pull the points. During the process of installing the pamco, I broke the camshaft pin and had to replace the camshaft...
Hi Everyone,
I have a 74 cb360 that I've been trying to install a pamco ignition system on, and I'm having problems getting the bike to start. The pamco is installed and wired per the instructions on cb360ignition.com. I've verified I'm getting a spark on both plugs and both plugs smelled...
Hi Everyone- I was wondering if anyone knows the size of the bolt that connects the side mufflers to the frame on a CL360, I believe it is part number 19 in the picture below (but unfortunately it looks like its not for sale on bikebandit).
Also, does anyone know the size of the bolt that...
Hi Everyone- I have a 74 cl360 (stock engine) that is currently using mikuni vm32 carbs (PO put them on). When I first bought the bike I had it tuned on a dyno and it ran ok, but the PO had open ended exhausts and I recently put reverse cone mufflers on, which changed the carb dynamics. Since...
Hi Everyone - I have a 74 cl360 that needs a new camshaft. I'm looking to buy a cb/cl/cj360 camshaft, or any compatible camshaft. Thank you for your help.
Hi Everyone,
I have a 74 cl360 and I just finished installing a Pamco electronic ignition. The installation went fine and I have a spark in both plugs, but I noticed after I installed the unit that my handlebar kill switch no longer works. When I put the handlebar kill switch in either of...
Hi Everyone-
I have a 74 cl360 and the front forks won't compress at all, no matter how hard I try to push down on them. The PO told me about the problem when I purchased the bike about a year ago and I'm just getting around to fixing it now (the bike's been sitting covered for most of...
Hi everyone- First post here but I've been lurking the boards for a while.
I have a 74 cl360 that I purchased last year, but due to school I haven't had much time to work on it until now. The bike started up fine on electric start and kick start about a month ago when I took it for a short...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.