Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Hello all,
This is my 07 Triumph Bonneville America that I am just starting to wrench on. Nothing serious yet as I can't figure out where to start.
On the way are 11" shocks (factory is 12.5") and Biltwell Keystone bars. I'm debating on painting the tank black as well.
I've been researching how to determine what is what on these carbs and im getting confused. There are 3 screws located under the carbs facing toward the engine, these have little tabs on them that are able to make contact with the float bowls, rendering them unadjustable with the bowls on. My...
Hi all. Well I've bought a new solenoid because the last one was bad. However this seems to be the only solenoid available for my 1980 cb750k. The connector does not fit so I've had to pull the pins out and I've no idea where each wire goes. I tried blindly connecting then by quickly touching...
So one problem after another on this Ole gal. 1980 cb750k
I bought all new floats and valves, cleaned the rest of the carbs. After installing it (and the airbox omfg) the carbs don't want to drink.
I literally 1 float bowl off while the carbs are on the bike and fuel flowing through my...
Well today I finally put the bike back together (1980 cb750k) and now I don't have any spark. Tested this with the plug in the boot while cranking the stater, whilst holding the plug close to the engine itself. No spark. After close examining, I saw that one of my coils is cracked. That being...
Hello all. I'm having issues trying to find the correct carb floats for my 1980 cb750k. I ordered a set and they did not fit, so that's money down the drain. Trying to avoid this again so I thought I'd ask where would be a good place to pick up a set of floats? They're the orange Keihin brand...
Hello, figured I'd start a build thread now. Picked up this 1980 honda that was stored in a shed since 2009. Owner couldn't get it started so he put it up for sale for 400. Talked him down to 300 and picked it up. After I brought it home, all it needed is a new starter solenoid and a good carb...
Hello. Just bought this big beast. Went to look at it, oil was good so I threw in some fresh gas and jumped the solenoid. Fired up after a while.
By the way the parts are for sale! Going to go with a cafe setup on this one. Will get more pinteresting when the sun provides.
Hello all. Just picked up this old 85 Honda Sabre for a mere $900. It runs perfectly and only has 15xxx miles! Plans are to attempt to café/streetfight this thing. Got a set of 37mm clip ons and a 7" rounded headlamp on the way as we speak. The rear section is going to be tricky as all hell. Any...
Hello all. Glad to be a part of a new forum with a new community.
This is my 82 Suzuki GS750. It's never finished as we all know.
The Harley Davidson Sportster 1200xlc
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.