Search results

Earlier in the summer I (and two others) acquired 3 bikes. 1968 Triumph Trophy 250 (completely restored but currently hosting the BSA 441 motor) 1968 BSA Victor Special 441 in a terrible state, parts rusted and hanging off (with the Triumph 250 motor in a box) 1968 BSA Victor Special 441...

My CB350 started literally shooting oil out yesterday. I checked under the sprocket cover and the plastic/rubber bushing that the clutch push rod goes though had pushed out. Anybody had this happen? I'm thinking high oil pressure maybe? My plan is to just liquid gasket it back in there. Hopin'...

Looking for a set of clip ons to try on my 350. Not picky on color or condition. Let me know if you've got a pair kicking around. Located in Toronto but open to shipping.

Anybody have any photos or links to bikes/builds with a luggage rack / sissy bar that doesn't look like junk? I'd like to have one that follows a similar line to the bottom of the seat and lose the vertical bar that was once a back rest. Inspiration or how to's welcome.

Anybody have any leads on where to get an inexpensive battery? I'm looking to replace mine with a 12v sealed battery and feel like there has to be a cheaper alternative to NAPA's $109.99 offer. Any ideas? Thanks, Pat

I just put a new stator in my cb350 as well as doing the radio shack bridge rectifier mod. So both of those have been replaced. I have been told that with a good charging system I should able to unhook my battery while running and the bike will stay running. This isn't happening. It dies after...

Taking part the rebuild of two 1968 BSA 441 Victor Specials just west of the city. The first engine was rebuilt by previous owner but there is a bucket of parts that needs to be turned into the second engine. We're looking for someone to handle that rebuild while we take care of the rest of the...

I'd like to put a toggle switch in controlling my headlight so that the low beam is constantly on and when the toggle is switched up both the high and low beams are on. What type of toggle do I need for this? Obviously a 2 position but with how many terminals? Thanks in advance, Pat

I have a CB350 with brand new oil and recently rebuilt engine. When I kickstart it it isn't even spinning the motor. I have to bump start it and then ride it for a bit until the clutch starts to catch. At first I have very little power as if the clutch is "dragging" (not sure of the terms as of...

I rode my bike not realizing how low on oil it was and now my kickstart wont engage the engine. I can bump start it fine but the kick is just sliding. Does this sound right? Thanks in advance for the help.

About to go for a safety in Ontario. Wondering if I should just not waist my time and replace this first. Is there a spec on tread height that anybody knows of?

I'm getting quotes of $3000+ for my 72' CB350. I'm 22, M2 with safety course. No prior motorcycle insurance. Anybody else have this issue? I knew it was going to be high but i thought like $1300 high. Over $3000 is nuts. Any ideas?

Every quote I get is well over $3000. I'm 22, M1 with a motorcycle safety course. 1972 CB350. Is this right? If so I have no chances of getting it on the road. I've tried a bunch of different brokers all through Jevvco I believe. There are other threads about this but all seem to be...

Looking for a sissy bar / luggage rack for my CB350 that isn't a 2 ft high spike triangle thing. Basically a 360 style one for a 350. Also, vintage leather panniers. Let me know if you got em. Thanks.

Anybody in the GTA have any leads on some sort of luggage rack for a CB350. I bought one that came off a 360 and its going to take some work to make it fit properly. I'd much rather get my hands on one that fits properly. The only ones I ever see in photos are like a 2 ft high spike and thats...

Hey, Looking for a spot in the GTA to buy an open faced helmet. Used or new. Just need plain colors. Nothing jazzy. Everything on Kijiji is closed face and covered in graphics. Let me know if you have any leads.

My CB350 kick start lever only kicks a quarter turn (starts at 11 and kicks to 9) before hitting strong resistance and just stopping. It also wont spring back up. Did I install this wrong. I swear when it went in everything was assembled in accordance with the expanded cmsnl parts picture...

Looking for a clutch basket for my 1972 CB350 K4. Located just outside Toronto. Anybody got one?

Hey, In reassembling my oil pump assembly I broke a tab off of my clutch basket. Was I doing this horribly wrong? Also, the clutch basket has a major wiggle to it. Is there some sort of bushing that needs to be replaced to fix this? I'm a noob and desperate for some good advice on how to...

I'm worried I damaged my kill switch during a handle bar replacement. I took my electric start button out completely because the spring broke (bike will be kick only in a few weeks anyway) so i've been attempting to start the bike by grounding the yellow and orange wire to the handlebar to...