Search results

  1. J

    1975 Honda cb360t engine rebuild kit

    Thanks for the info. What my problem is I'm hearing a clicking sound from the right cylinder. My buddy said it could be either the wrist pin bearing or a crankshaft bearing. I originally thought it was the valves. We checked those and they were a little loose at .006 and we set them to .002...
  2. J

    1975 Honda cb360t engine rebuild kit

    Does anyone out there know where I can get a complete engine rebuild kit for my 1975 CB360T? Please help.
  3. J

    Cb360 oil change

    No worries, thanks for the info!
  4. J

    Cb360 oil change

    I'm wanting to change the oil on my 75 cb360t. I am wondering if there is an oil filter. If there is where is it and how do I change it?
  5. J

    cb360t front farring

    Thanks for the info!
  6. J

    Cb360 jetting

    Thanks for the info!
  7. J

    Cb360 jetting

    On my 75 cb360t I have screaming eagle mufflers on it. I was wondering what size jets I would need if I were to run open pipes? Your suggestions will be very helpful.
  8. J

    Tire size

    What are the widest tires I can fit on my 75 cb360t?
  9. J

    cb360t front farring

    Does anyone know where I can get a good front farring to go around the headlight?
  10. J

    CB360T wiring

    What I ment about powering up the white wire is that I hooked it up to the battery. With the other answer I'll check it out with the high beams on. Thanks! I aslo have another issue when I turn on the high beams the turn signals go out. Could that be from a bad ground?
  11. J

    CB360T wiring

    I have a 1975 cb360t, I was wondering if anyone knows that the white wire going into my stator is supposed to be hot? I got the bike and it has been rewired to a toggle switch instead of the key. I tried to power up the white wire and when I did the bike wouldn't shut off. Should this wire only...
Back
Top Bottom