Question - the GSXR has a plugin and the CB has loose wires.VonYinzer said:Find the GSXR wiring diagram, then find the CB diagram and start matching wires.
SONIC. said:You need the wiring diagram from the bike it came off of so you can figure out what each wire does.
Then use the wiring diagram from your bike to align the wires.
Alternatively you can sit there for hours with a multimeter figuring out what wires do what.
Thank you sirVonYinzer said:No matter how you chose to move forward, you're either cutting the honda wires and making plug ends or vice versa. Plan ahead... You'll have to order/buy the proper connectors either way.
Agreed. I guess I will cut the GSXR wires and make them individual wires.hillsy said:It's really not that hard to pull the switchblocks off, open them up and see which wires do what.
As said, you will have to either buy connectors or connector blocks to mate up the wires - if it was me, I'd get the individual connectors (like on you old CB switchblocks) rather than connector blocks. That way you can easily switch stuff around if you get a connection wrong.
Or I can't simply use the CB350F controls!hillsy said:It's really not that hard to pull the switchblocks off, open them up and see which wires do what.
As said, you will have to either buy connectors or connector blocks to mate up the wires - if it was me, I'd get the individual connectors (like on you old CB switchblocks) rather than connector blocks. That way you can easily switch stuff around if you get a connection wrong.