Finnigan
Over 1,000 Posts
Trying to get my tach to work. Its a Motogadget Chrono classic that has a digital signal pickup. The needle reads 9k when I'm at idle and I'm confident wiring is correct. I contacted Motogadget support and they said the issue is from electrical interference (like having satelite TV near power lines) and it would be fixed if I used resistor style spark plugs or switched from 5k ohm to 10k ohm.
I'm running EI and high output Dyna coils from Charlie's Place. Charlie said the coils should have no problem with whatever caps I use, but I wanted a second opinion.
Thanks y'all
I'm running EI and high output Dyna coils from Charlie's Place. Charlie said the coils should have no problem with whatever caps I use, but I wanted a second opinion.
Thanks y'all