just copy and pasted from another forum i post on.
located right outside of detroit michigan
I picked this bike up about two years ago, started really working on it this past spring and its sat all summer. it needs a good home and someone to finish her up. its mid stage of a build, but its at a point where someone can finish it as theyd like.
when i got the bike, it had no motor in it. i did however pick one up. ive never actually fired it up, didnt get around to finishing it to that point.
mileage is unknown on motor, frame has less then 3500 on it. i do not have a title for it, seeing as its a 42 year old bike and i received it as a parts bike.
modifications
-stretched rear swing arm. 5 1/2 inches longer then stock, done by my roommates stepdad(hes known for his welding work, featured in some magazines) so its done properly.
-rear is cut short
-7/8 drag bars
-smaller tank then stock from an old honda dirtbike
-new(ish) rear tire. 3.25 inches wide. stock is 3.00, i have a spare rear rim and stock tire that comes with the bike
-fresh matte black paint job, i tore the bike down to bare frame and painted it
what needs to be done to finish it
-needs a custom seat made(i can give you my plans for the seat i was going to build)
-needs a battery
-needs coil pack
-needs chain(must be cut to custom length due to the 5 1/2 inch stretch)
-needs front brake adjusted
-rear brake must be hooked up
-swing arm needs paint, rear rim needs paint finished.
-comes, with everything besides battery, coil and chain. i have bins full of parts and random boxes with everything else to finish it up.
comes with all the stock parts minus the handle bars plus the original owners manual
looking to get $450 flat for it. that puts me dead even with what ive spent including what i paid for the bike.
moving back across country in a month, towing my car, dont wanna haul the bike with me.
i have a build thread on this site with more insight on the bike
http://www.dotheton.com/forum/index.php?topic=34942.msg377971#msg377971
located right outside of detroit michigan
I picked this bike up about two years ago, started really working on it this past spring and its sat all summer. it needs a good home and someone to finish her up. its mid stage of a build, but its at a point where someone can finish it as theyd like.
when i got the bike, it had no motor in it. i did however pick one up. ive never actually fired it up, didnt get around to finishing it to that point.
mileage is unknown on motor, frame has less then 3500 on it. i do not have a title for it, seeing as its a 42 year old bike and i received it as a parts bike.
modifications
-stretched rear swing arm. 5 1/2 inches longer then stock, done by my roommates stepdad(hes known for his welding work, featured in some magazines) so its done properly.
-rear is cut short
-7/8 drag bars
-smaller tank then stock from an old honda dirtbike
-new(ish) rear tire. 3.25 inches wide. stock is 3.00, i have a spare rear rim and stock tire that comes with the bike
-fresh matte black paint job, i tore the bike down to bare frame and painted it
what needs to be done to finish it
-needs a custom seat made(i can give you my plans for the seat i was going to build)
-needs a battery
-needs coil pack
-needs chain(must be cut to custom length due to the 5 1/2 inch stretch)
-needs front brake adjusted
-rear brake must be hooked up
-swing arm needs paint, rear rim needs paint finished.
-comes, with everything besides battery, coil and chain. i have bins full of parts and random boxes with everything else to finish it up.
comes with all the stock parts minus the handle bars plus the original owners manual
looking to get $450 flat for it. that puts me dead even with what ive spent including what i paid for the bike.
moving back across country in a month, towing my car, dont wanna haul the bike with me.
i have a build thread on this site with more insight on the bike
http://www.dotheton.com/forum/index.php?topic=34942.msg377971#msg377971