Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Nevergrew, I will need to blue slip it.
I'll have to fab up some sort of front fender for it.
Hopefully they aren't too picky with the tires and rear fender.
I reckon you'll be right with the tyres although your rear guard and light are similar to mine and from what people have told me, it'll be too short, which sux because we'll need a replacement one for blue and future pink slips. I have thought about taking it like that and seeing what they say. Other requirements are chain guard, mirrors and horn.
Engine is all assembled now and painted.
It's still drying so I'll get some photos later.
I also decided that I'm running a bottom mount headlight, so I designed a bracket in CAD that I'm getting laser cut.
Also drew up some extended fender brackets to raise the front fender to suit the bigger tire.
If anyone else wants some, let me know as I can get more cut out.
Failing that, there are 3 basic measurements for each bearing (top and bottom). Outer diameter, inner diameter and width/height.
Wrong link before too....
http://www.allballsracing.com/index.php/forkconversion
Making good progress lately.
Engine is in.
Tank is at the blasters, and will be ready tomorrow.
Header pipes are off getting ceramic coated.
Started shaping the seat, but want to get the tank back to check the lines.
My switch housings arrived and I fitted some switches.
Moving into my first house next week which has a nice little workshop setup. Looking forward to that!
Nice bike. What do you have covering the upper forks? Looks like some sort of cover or am I mistaken? My fork uppers are rusted to shit so I'm trying to figure out what to do.
Very nice build my man, I like it a lot. I noticed on your seat pan that you have axles welded on to it? Did you also weld brackets on to the frame so you can slide the axles thru the brackets and put nuts on the axles to mount the seat? Im also interested in those toggle switches, where'd ya find those? Again nice bike
Ty
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.