durp
Been Around the Block
Going through the standard procedures, one of the checks I did was on the 3 yellow wires going to/from the generator to the rectifier. According the manual (IIRC) it should ready less than .2 ohms. I made sure the battery was disconnected for this test.
Assuming I did this correctly, and that I have the correct ohms setting selected on my multimeter, it looks like the issue is in the stator/generator. Can anyone confirm I am testing this correctly?
Assuming I did this correctly, and that I have the correct ohms setting selected on my multimeter, it looks like the issue is in the stator/generator. Can anyone confirm I am testing this correctly?