SpaceTrucker
Active Member
After way too many weekends cleaning and prepping a dirt floor garage... I'm finally about to start working on the bikes. They haven't been started in many many years and a lot needs to be done before I can even ponder what kind of personalization I'll add to them. For a little backstory, here is my intro: https://www.dotheton.com/index.php?threads/howdy-from-austin-texas.77001/
They have not run in many years. Looking the bikes over, I know I'll need to clean a ton of rust out of the tanks, rebuild the carb, rebuild the forks, refurb or replace the cables and chain, and lots more. It will be a lot of work but I'm really looking forward to it. This is all a first for me, so I hope to gain knowledge from you guys but I'll try not to lean too hard to be a nuisance.
I think I'll try to get the CB125 running first.
They have not run in many years. Looking the bikes over, I know I'll need to clean a ton of rust out of the tanks, rebuild the carb, rebuild the forks, refurb or replace the cables and chain, and lots more. It will be a lot of work but I'm really looking forward to it. This is all a first for me, so I hope to gain knowledge from you guys but I'll try not to lean too hard to be a nuisance.
I think I'll try to get the CB125 running first.