1980 650 pd50 carbs with accelerator pump on them

rjz5400

grummble grumble
as the ad says thats what i got. i got them when i bought my bike and i tired to make them work. these are best as parts carbs, they have a couple of screws stripped and i took of the choke plates to disassemble them. other than those nothing is missing just may need to be put back properly. i took them apart and cleaned the crap out of them and then found out they were not even close to right fr my bike, jet sizes and rebuilds, boots were to big n both ends.
so if you have a 650 check the pics and check your numbers i took a picture of the number written on cardboard.
id number
IMG_3576.jpg

bodies of one
IMG_3574.jpg

IMG_3573.jpg

IMG_3571.jpg

missing choke plates apparent and can see the choke return spring is loose between two and three
IMG_3570.jpg

also throttle return spring is very stiff i dont know if that is abnormal
and the fuel screws seen in picture 2 are messed up one is non stock and two are chipped. just to be fair and clear. from what i understand these are pretty hard to find so id like to get 40 plus shipping because thes are totally rebuildable and the accelerator pump works i just didnt want to mess with it. let me know what you guys think
 
Back
Top Bottom