Hey guys, I will be posting the build progress of my bike which I bought around May last year. It was in a very bad condition barely running, low compression, leaking oil and fuel and clearly not serviced for a very long time. The build was strictly on a budget and I made/repaired everything myself and buying parts only for cheap. The bike has been Stripped all down and painted/rebuilt with new parts where possible. The bike was also running very badly and was massively losing power on high revs 8K + . I decided to strip the engine down to see whats going on and found that one of the piston sleeves was cracked. I bought a new kit including new pistons, rings and block to sort this out. While the engine was stripped I cleaned everything and lapped the valves for better sealing. Rebuilt the engine and carbs, slapped it on the bike and ran perfectly.
Attachments
-
IMG_20170505_194122.jpg410 KB · Views: 196
-
IMG_20170822_105628.jpg329.8 KB · Views: 193
-
IMG_20170826_144336.jpg279.2 KB · Views: 197
-
IMG_20170828_101011.jpg340.5 KB · Views: 197
-
IMG_20170905_121303.jpg385.6 KB · Views: 198
-
IMG_20171001_075736.jpg389.4 KB · Views: 192
-
IMG_20180108_145028.jpg374.1 KB · Views: 200
-
IMG_20180108_110326 (1).jpg2.9 MB · Views: 193
-
IMG_20180108_154121.jpg288.5 KB · Views: 198
-
26170919_709165102620425_1490974927277688953_o.jpg164.1 KB · Views: 208
-
IMG_20170819_170337.jpg356.7 KB · Views: 195
-
IMG_20170819_170345.jpg297.4 KB · Views: 203
-
IMG_20170517_233519.jpg292.4 KB · Views: 202
-
IMG_20170525_090132.jpg302.8 KB · Views: 194
-
IMG_20170526_134502.jpg549.2 KB · Views: 199
-
IMG_20170628_133057.jpg528.6 KB · Views: 193
-
IMG_20170708_120208.jpg330.7 KB · Views: 201
-
IMG_20170709_031032.jpg391.7 KB · Views: 193
-
IMG_20170711_135801.jpg334.9 KB · Views: 190
-
IMG_20170711_141636.jpg413.4 KB · Views: 190
-
IMG_20170819_154629.jpg375.8 KB · Views: 196