Started cleaning the carbs again. First time I did it, I only cleaned the bowls out and blew some cleaner through and didn't really mess with anything else. Have gone through 2 for now and have set up the floats according to a Mikuni BS34 rebuild guide I found online (they were totally off when set up with bowl off) .. will need to verify this when I do the clear tube level test. Pilot was clogged and I may have to dig back in again as the Jets are all stock and the bike now has pod filters and 4-1 header by previous owner ... still chugging along. Will prob need a jet kit and some misc seals, o-rings, and plugs