Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
This is a project that's been in the shop for quite a while, and has a lot of custom parts and fabrication work. I'll post updates and photos here as the build progresses.
We're trying to figure out how we want to paint the oil tank. The project is supposed to be military themed, so we've considered painting it up like a globe, a cannoball, or putting a flying tiger on it.
Why not hard tail the existing frame? If you can get your hands on a cheap angle grinder or chop saw you can use a kit like this to cut it all out, and then take all the pieces to someone to have it welded together.
Why not hard tail the existing frame? If you can get your hands on a cheap angle grinder or chop saw you can use a kit like this to cut it all out, and then take all the pieces to someone to have it welded together.
Where are you at in Georgia? I have a 1972 SL350 frame that I will sell. Depending on where you are, I can even deliver. I have the frame, swingarm, rear axle with spacers/adjusters, forks, even a gas tank that would be usable. Probably some more parts. I'm downsizing my projects and I'll take $100 for all of it. Bill of sale on the frame.
PM if interested.
Regards,
John
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.