Treesus
Probably not sane.
Ok. I just installed new guides and valves on my CB360 head and am about to put the upper end all back together.
When stepping up the valve size 1mm, do I need to check piston to valve clearance? My head has not been skimmed at all, and I am using a copper gasket.
I have read about needing to do this when the head has been skimmed, but not heard anything about just changing the valves.
Thanks
When stepping up the valve size 1mm, do I need to check piston to valve clearance? My head has not been skimmed at all, and I am using a copper gasket.
I have read about needing to do this when the head has been skimmed, but not heard anything about just changing the valves.
Thanks