68 CB 350 Carburetor / Air Box Clamps

[jakeZ70]

I've been looking for some replacement carburetor / air box replacement clamps for my 68 CB 350 without much luck. What I have found tend to run in the price range of $10 a piece. Are there any other options after market etc that will work in their place? I've heard that standard hose clamps are too wide.

 

[mydlyfkryzis]

You can buy the stock clamps new from the dealer: http://www.houseofhondaparts.com/fiche_section_detail.asp?section=2447639&category=Motorcycles&make=Honda&year=1968&fveh=131006

Item 9. They are in stock and about $7 each....

 

[jakeZ70]

Thanks. I forgot about this place.

 

[mydlyfkryzis]

Most Honda Delaers will have them...You can use the one I posted, or shop around for a closer dealer or cheaper price....

 

[jakeZ70]

Looks like the carb clamps were available, but not the air box clamps. After a bunch of searching I found these. I think they'll do the trick. 1mm wider than stock, but I don't think that will be an issue. http://www.ebay.com/itm/150565305622?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_582wt_1098