gioventures
New Member
So im looking to install some clubman bars that i purchased from DCC on my 1972 CB500 Four K0. They are EMGO bars with a Width of 27.5" Center: 6.5"
Pullback: 4.5" Rise: 4.75" DIA: 7/8"
The question is, what cable length do I need for this set up with my push/pill throttle cables, clutch cable, tach, and speedo. If any one has exact measurements, it would be helpful. What cable length do you have on your set up? Will my stock cable lengths work, or will there be too much "slack" for positive throttle feedback with low bars???
Pullback: 4.5" Rise: 4.75" DIA: 7/8"
The question is, what cable length do I need for this set up with my push/pill throttle cables, clutch cable, tach, and speedo. If any one has exact measurements, it would be helpful. What cable length do you have on your set up? Will my stock cable lengths work, or will there be too much "slack" for positive throttle feedback with low bars???