75' CB360 front disc issue, seized after lever on master is pulled

[middlemiss]

When i picked up my bike it had a siezed front caliper which I assumed to be the caliper piston being siezed up, however I took it apart last night and it is in great shape and moves freely, including the caliper mount/slider. I read a couple threads I found by searching the forum in regards to brake drag and someone suggested to clean the small hole in the master cylinder with a needle. The master cylinder functions as it should producing pressure but it seems the pressure doesnt return well and keeps the front wheel locked up.

Is it safe to assume that i should just rebuild the master completely? I plan on installing stainless lines as well for safety.

Thanks
Joe

 

[lingo]

Replace the rubber line. It has collapsed internally. Get a steel braided line and you will have better brake response as well

 

[mydlyfkryzis]

1. Rebuild the master cylinder. the internals are stuck.
2. Slingshot cycles has perfect replacements for our bikes. Color choice too. slingshotcycles.com
3. I bet your steel line into the Caliper is munged up too. They are available from Honda brand new.