mydlyfkryzis
当有疑问时踢你的敌人在生殖器上,你可以道歉后
Re: 76 CB360, Re-labled...Outlaw Cafe.
Keep your Disney straight..He Killed Bambi's Aunt Ena.... ;D
Keep your Disney straight..He Killed Bambi's Aunt Ena.... ;D
mydlyfkryzis said:Computer rebelling from the pics he sent Worst CB650 ever....LOL
Foolishdreamer said:Good luck!
Where do you have to go?
Sent from my brain using telepathy and Tapatalk
Worst cb650 ever said:Yea, I'm hoping that thing will just walk out of there when you hit it with the left handed bit. Sheesh, what a pain!
crazypj said:Sounds like it should be OK now, once you get penetrating oil into the back of screw things generally go relatively smooth
Stepping up with left hand drill bits may well do the trick?
Foolishdreamer said:Where is Rust Revival? It sounds interesting, and I live in KY...
Sent from my brain using telepathy and Tapatalk
trek97 said:the very god created kentucky
trek97 said:OK two weeks before the Thaw...
Yesterday found A broken stud.
Ive got left hand cobalt bits and square shaped straight flute extractors coming...amazon still promising tomorrow.
I have been soaking her in penetrant.
Picked up a 10mm stud and tap drill in case things dont go well... as I dont really expect em to.
tonight I started heating her up w the torch until the pen fluid started to bubble then drowning her in more pen fluid. Hoping to leech some up in there.
after several times I got bored w that and center punched it.
started w a 1.5mm drill about 1/4 inch deep.
Then stepped up to a 3/32 bit. And w the old lady standing over me watching the angles I drove her home...Close to an inch deep I hit aluminum and I dont think I broke through the side.
Sticking the bit back in to the bottom and Looking at the angles I think I did all right. Comparing it to the other stud.
Now at least I can get penetrant fluid all the way in there.
While I just wait til the left hand bits and extractors arrive.