76 CB360t $4000 obo tons of extras

tattoodup12

New Member
$4000 obo 9comes with spare motor, spare set of plished covers, spare parts motor and about 4 boxes of 360 stuff

i have up for sale my full custom cb360. this bike is titled/reg in my name with clean title in hand. 15846 original miles. this bike is my baby...well was now my 68 triumph is shapin up so out with the old and in with the new/old.

this is the original motor 360/6speed. it runs like a bat outta hell. will surprise most and the rest will be left guessin. it has fresh paint mitsubishi eclipse p36 rave red pearl. the seat is custom carbon/glass built by me. the seat upholstery is one off from my dads leather shop black vinyl with very forgiving neoprene padding. swing arm stretched 6" braced gusseted built to last. the wiring has been completely stripped, minimized and redone 110%. there is highbeam only (on toggle switch), 2 LED tail lights, provisions for a horn (wires/custom button remain) but not hooked up and a single LED tag light. besides the minimal vital wiring for the bike to run all else is gone. the bike has had the electric start removed and a block off put in its place. lowered shocks, lowered forks. the seat has a storage compartment built in will hold 20 bottle, sweat shirt, papers andything you can thing you may need on a bike like this...the list goes on. stock this bike did about 80ish MPH with the carbs, mods, tweaks and exhaust ive had it upto 105 with a lil plenty of RPMs left. i have alot of stock parts also available, boxes of parts good motors. please feel free to ask me for any pictures of anything you may want to see closer.

this bike was recently photographed for a popular motorcycle magazine. we havent gotten the thumbs up or down yet so no name will be mentioned


NEW (less than 500 miles)
fork seals/fluid
tires/tubes
pads/shoes
joker machine gas cap
rear shocks
timing chain
H/O Ricks motorsports charging system (was $250 alone)
inline fuses
valves adjusted
timed
plugs/wires/coils
DEITZ head light/H4 conversion
fully polished engine covers/points cover/rear drum
drilled drum
HD inverted foot pegs
fork gator covers
clip on bars
ODI long neck grips
mikuni carbs
carbs jetted/synced/tuned
custom 2-1 stainless to V-band (one off)
UNI filter pods
5" megaphone (baffle included)
battery

also newer racing clutch lever, 1/4 turn throttle, sportbike front master cylinder again im sure im forgetting some of the upgrades on this bike but i assure you, you wont be disappointed.


IMG_4376EDIT.jpg


IMG_4359EDIT.jpg
 
Re: 76 360t one of a kind

tattoodup12 said:
this bike has had a ton of stuff done to it, built for it and put on it. please feel free to email me for a full list. just too much to put here.
Jus' curious...
If you can spend the time to type it into every email request, why not spend the time once and post it here?
 
Re: 76 360t one of a kind

actuallu redbird i wouldnt be typing it to every person i would be saving it as a draft and just attaching it to the emails i got. the reason, since you must know, that im not typin it here is because for some reason after i got through typing it all once the screen wont scroll down as i typed and it all deleted once i typed it cuz there was some error code so all info was lost.

with that said email for info on the bike if your interested and have a decent offer. the tires are shinko 705 series
 
Re: 76 360t one of a kind

Ah, gotchya ;)
I get them same issue occasionally when typing long replies. The Copy/Paste function works well for that ;)
 
Re: 76 360t one of a kind

How far is swing arm extended?
apart from exhaust, shocks (S&W?) swing arm, drilled rear brake plate, (without extended torque arm ::)), seat, bars, there are not really any other obvious mods?(stock frame, footrests, forks, brakes, wheels)
Oversize tyres on stock rims isn't a good idea, even if it looks 'cool' (they bulge a LOT, even in the pics it's noticeable)
looks about $2,500 to me as there is probably a lot of (someone elses?) time in it
 
Re: 76 360t one of a kind

agreed, this looks mostly like a stock bike with a couple parts on it... if the engine were truly "built" then it would be nice to know what was done to it, it's not a particularly great motor to begin with and a lot can be done to improve it, would be good to know if real improvements were made. the swingarm is also a concern, I see it's extended and makes a nice stress point where the shocks are in relation to the axle now, as well as changing the ratio of load to travel on the rear end... I wouldn't ride it that way. I have a 360 with a "built" motor, alloy tank, seat, stainless exhaust good tires and progressive shocks, and I couldn't get my reserve of $3500 on ebay for it, so I kept it. if you're building these bikes to sell, it's probably a losing proposition unless you're prepared to either restore them or go balls out
 
Re: 76 360t one of a kind

crazypj said:
How far is swing arm extended?
apart from exhaust, shocks (S&W?) swing arm, drilled rear brake plate, (without extended torque arm ::)), seat, bars, there are not really any other obvious mods?(stock frame, footrests, forks, brakes, wheels)
Oversize tyres on stock rims isn't a good idea, even if it looks 'cool' (they bulge a LOT, even in the pics it's noticeable)
looks about $2,500 to me as there is probably a lot of (someone elses?) time in it

actually99% of the time in the bike is mine...good job assuming though. 6" extention on the swing arm (fully gusseted and slugged) the seat is built from carbon fiber from scratch the cover was made from scratch. exhaust was built here by me. the tires that WERE on this bike were 3.5 rear now its 4.5 and the front was 3.00 now is 4.10" had no issues with them and they were installed by the shop that bid the timing and carb work. also, no one ever said this motor was built so someone jus seems to be reading shit wrong.

feel free to pick the bike apart if youd like. this is a forsale thread not general discussion. if you arent interested in it its your right not to buy it. so take that right and move along.

thanks all
 
Re: 76 360t one of a kind

Good luck with it, didn't mean to berate anything, just wondering.
Glad to hear you did just about everything, damn time consuming work

PJ
 
i with pj on this one... looks alright, but the few things mentioned (shock placement and WAY oversized tires, for example) would keep me from doing much riding in its current state.


theres a cb360 outside my house i can buy for 400 bucks. if i put in 2000 dollars, i could have the same bike, but much safer.

your asking too much. no offense, just trying to help you get SOMETHING for it. if you get your asking price, more power to you.
 
Re: 76 360t one of a kind



feel free to pick the bike apart if youd like. this is a forsale thread not general discussion. if you arent interested in it its your right not to buy it. so take that right and move along.

thanks all
[/quote]

This isn't CraigsList either... It's a mesage board.

4 grand will buy alot of bike... Like 8 stock 360's

haha

seems like your fishing for a sucker. Just in the wrong fishing hole...
 
tattoodup12 said:
this bike was recently photographed for a popular motorcycle magazine. we havent gotten the thumbs up or down yet so no name will be mentioned
Ah, I see you figured out the copy/paste feature ;)
My bike was also photographed for a popular motorcycle magazine! And a popular gentlemens magazine, a popular New York newspaper, and a popular network sitcom! But alas, I haven't heard back from them either... so no names :(

I saw it on eBay last week...
http://cgi.ebay.com/ebaymotors/1976-cb360T-cafe-racer-low-miles-1-kick-bike-/110627558747?pt=US_motorcycles&hash=item19c1ea955b
$1000 starting price and zero bids :eek:
 
damn, everyone really over anylized this one huh.
to each their own, let him sell whatever the hell he wants fellas.
just sayin.
please dont start a war. i have no gun hahaha
 
Back
Top Bottom