Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
If someone hasn't already recommended it order your O-rings from Cycle O-rings and just clean dip and clean all your brass parts by sticking a piece of wire through all the holes.
http://www.cycleorings.com/
Order the bowl drain o-rings too, he will throw them in for $0.01
Check to see if your carb holders also called carb boots have cracks or are too stiff. If so they should be replaced. Check the large o-rings between the carb holders and the head. they most likely will need to be replaced too. If they are flat, hard or cracked replace them. You can get those from cycle o-rings as well. You might as well replace them while you are in there because they are pretty cheap. He also has the screws that secure the carb holders to the head, they are usually rusted and are a good idea to replace.
He doesn't have the carb holders, for those you will need to get them from z-1 or someplace like that.
I think I paid about $24 for all the o-rings, new bolts and washers, and Carb holder o-rings.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.