Anyone have any luck using used Mikuni Carbs on a cl360
- Thread starter dshricci3
- Start date
duggyb
where are the skis?
the VM30 is quite a popular swap for the 350/360 bikes. i have a set of Mikuni VM30s for my 360 but i have not fired it up yet.
the biggest thing is to make sure you jet them proper and get the proper flanges for your motor. Also you will need a 2into1 throttle cable and some sort of intake. Pods is the popular choice.
Dime City Cycle sells this as a package for about $370. Pods/Carbs(Pre jetted), some spare jets and a throttle cable.
This is the package i got but from a forum member on here. if you can get both carbs for under $150 on craigslist your still going to spend another few $$ on pods and jets and cables. so make sure its worth your time.
Hope this helps.
Dustin
the biggest thing is to make sure you jet them proper and get the proper flanges for your motor. Also you will need a 2into1 throttle cable and some sort of intake. Pods is the popular choice.
Dime City Cycle sells this as a package for about $370. Pods/Carbs(Pre jetted), some spare jets and a throttle cable.
This is the package i got but from a forum member on here. if you can get both carbs for under $150 on craigslist your still going to spend another few $$ on pods and jets and cables. so make sure its worth your time.
Hope this helps.
Dustin
