cierrecart
Been Around the Block
Thanks man.
ajeevisser said:Does anybody know if the forks of the Holiday Customs GN400 are lowered internally?
It looks like they are just lowerderd in the steering stem.
My fork seals are leaking, so I've got to rebuild mine anyway.
cierrecart said:Almost positive they're lowered internally. I tried just sliding them up in the trees and the front end was just way too high. Internal is the way to go. I took 3" out of mine.
cierrecart said:Cut and shaped a Walmart workout may today. Glued 3 layers on, cut to shape then used a flap disc to shape it a bit. Should be good enough. I plan to have it professionally upholstered. Looking at black leather/vinyl with red stitching in either tuck n roll or diamond pattern.
ajeevisser said:I made some 2" spacers. Think that's the right way to go.
Cierrecart used 3" spacers and his fork is very low.
Is it right I have to cut the springs 2" too?
ajeevisser said:I made some 2" spacers. Think that's the right way to go.
Cierrecart used 3" spacers and his fork is very low.
Is it right I have to cut the springs 2" too?
ajeevisser said:I made some 2" spacers. Think that's the right way to go.
Cierrecart used 3" spacers and his fork is very low.
Is it right I have to cut the springs 2" too?