Basic Yamaha CDI question???

[PancakeShake]

Rewired my FJ1200, no spark. Checked it out, and the Black w. White tracer (B/W) wire coming out of the CDI was going to no where.

CDI:
Black gets grounded...check
Red gets +12v...check
Orange to Coil...check
Gray to Coil...check
Pick ups are plugged in...check
Coils have +12v...check
B/W....mystery

The diagram shows the B/W going to the side stand relay (which i removed) and then around to other stupid relays.

So my question is, does the B/W go to ground? OR does it get 12v?

(B/W wire is coming out of the "Ignitior Unit" in the upper-mid-right)

http://imageshack.us/a/img14/4015/8687wiringdiagrambig.png

 

[joepagejr]

Do you have any more info on the side stand relay about which wires are for the coil, and which are contacts?

 

[johngofast]

Looks like it goes to B/Y that connects to the Relay unit if you're bypassing the stand switches and clutch switch. I'd draw it out if I was at a computer.

Also, I wouldn't call is "basic" once you start eliminating or customizing your wiring, haha.

 

[Rich Ard]

Ha. I concur with John on both counts :