Hey guys. I'm in the home stretch of putting my dads old kz750 back together, but I'm having some issues with the wiring from the push button start/ off-run-off wiring not working right... Here's my situation: if I unplug most of the mess from in the headlight, and connect the 6 wire connector to the start button connection, I get power and a complete circuit when the bike is in the "run" position, but the push start doesn't work. When I connect the rest of the wiring in the headlight housing up (the turns, neutral lights, etc), and connect the 6 pin connector from the push button starter, and turn the ignition on, I blow a fuse immediately. Any idea where I should start checking? I'm thinking its a grounding issue, but I can't find anything. Also, I tried bridging the starter solenoid and the engine cranks... Hopefully you guys have an idea as to where to go from here? Thanks