Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Chisel any remaining tube level with the aluminum.
Drill it out with a #25 drill bit.
Get a length of 5/32 OD brass tube. (Available from hobby shops and some hardware stores.) Make it 1/2" or so longer than needed. Heat the tip with a torch to anneal. Peen the tip to a smaller opening.
cut to the required length, and press into the hole you drilled out.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.