carburators sohc4

pyro139

1981 cb650c
need set of carbs for a cb650 sohc 79-80 or 82, not 81's since they bad design prefer 79 or 80's since there mechanical slide, could also get away with useing late model 750 shoc carbs again prefer mechanicals, if got any these itmes let me know price or if i have any parts you may need, of what i have that has value and willing give up is a cb650 front break rotor and a 650 left side caliber(no banjo's need it to do custom right side single break setup), caliber needs be rebuilt piston needs reseting, left side is standard side for all honda single break set ups, rotor is 5 bolt not 6
 
Talk to my friend Bob Andrews in Port Dover.
I bought my cb550f from him. He has a lot of parts esp for your cb650.

Heres an ad that he has on the Classic Bike Exchange.:

For Sale: Parts for Sale Ad: P59
2 motors for CB500 75.00 each, 650 motor with carbs & electronics 125.00,wheels ,CB500 frame with ownership 125.00,lots of small parts ,carb sets 60.00, seal sets 25.00. very good original exhaust for CB550 supersport 200.00, new jardine slip-on for CB550F 125.00, trade it all for a running automatic bike like a Suzuki GS450A or Honda CB450. 519-4281772 email: andrews@kwic.com

Tell him I sent you.

He'll probably be at the Swap Meet in Milton at the end of the month.

N
 
locOleoN said:
Talk to my friend Bob Andrews in Port Dover.
I bought my cb550f from him. He has a lot of parts esp for your cb650.

Heres an ad that he has on the Classic Bike Exchange.:

For Sale: Parts for Sale Ad: P59
2 motors for CB500 75.00 each, 650 motor with carbs & electronics 125.00,wheels ,CB500 frame with ownership 125.00,lots of small parts ,carb sets 60.00, seal sets 25.00. very good original exhaust for CB550 supersport 200.00, new jardine slip-on for CB550F 125.00, trade it all for a running automatic bike like a Suzuki GS450A or Honda CB450. 519-4281772 email: andrews@kwic.com

Tell him I sent you.

He'll probably be at the Swap Meet in Milton at the end of the month.

N
that email address doesnt work :mad:
 
locOleoN said:
Talk to my friend Bob Andrews in Port Dover.
I bought my cb550f from him. He has a lot of parts esp for your cb650.

Heres an ad that he has on the Classic Bike Exchange.:

For Sale: Parts for Sale Ad: P59
2 motors for CB500 75.00 each, 650 motor with carbs & electronics 125.00,wheels ,CB500 frame with ownership 125.00,lots of small parts ,carb sets 60.00, seal sets 25.00. very good original exhaust for CB550 supersport 200.00, new jardine slip-on for CB550F 125.00, trade it all for a running automatic bike like a Suzuki GS450A or Honda CB450. 519-4281772 email: andrews@kwic.com

Tell him I sent you.

He'll probably be at the Swap Meet in Milton at the end of the month.

N
dont you have a different email for him?
 
locOleoN said:
Just spoke to Bob.. He doenst have the carbs any more...
damnd, thx noel cause i hate having shut petcock every ten minutes so the faulty vacuum gauge doesnt overflow the fill tubes, doesnt flood carbs any more just when floats close vacuum doesnt so it reroutes extra fuel to the road :D
 
With all the problems that you have, I think you should just dump that cb650 and buy a runnging bike for a $1200..
 
locOleoN said:
With all the problems that you have, I think you should just dump that cb650 and buy a runnging bike for a $1200..
but problems are all fuel now that front end fixed a decent set carbs will fix it.
 
pyro139 said:
but problems are all fuel now that front end fixed a decent set carbs will fix it.
Well put cb750 carbs in them and be done with it!! ;D
 
I have a set from a 78K model with a fuel accelerator.
Its complete but disassembled since I was going to put it in the cleaner tumber and rebuild. I havent had time.
You'll need to get a new rebuild kit and reassemble.
 
locOleoN said:
I have a set from a 78K model with a fuel accelerator.
Its complete but disassembled since I was going to put it in the cleaner tumber and rebuild. I havent had time.
You'll need to get a new rebuild kit and reassemble.
you ever get those measurements?
 
Back
Top Bottom