Carpy's swingarm for the CB750F

[ejc2g]

Anyone out there with a 78F running Carpy's Dresda style swingarm? I'm doing an earlier CB750F spoked wheel in the back and trying to make sure everything will work together before I order it.

I really want a Dresda, but they are hard to come by.

Thanks.

 

[Tim]

If Carpy knows anything, it's the CB750. What concerns do you have?

 

[ejc2g]

Well I spoke with him and he said I may have an issue with running it on my 78, but I'm running a rear wheel from a 76F. I was just curious if anyone is running this set up and what would be necessary to make it work.

 

[BWJ]

I am running a Genuine Dresda on my 78 F3. I am also using a 75F rear hub for the spokes. I had to modify the spacers a bit and use a couple washers for spacers as well. I am using an early VFR axle as well because the stock axle is too short but I think Carpy's comes with one? Contact member tweakin, he is running the Carpy swingarm on his 77 F2 with spokes as well.